Product NumberA-Dual In-Line
Multi-task your audio with this stereo/dual channel noise cancelling unit!
The bhi Dual In-Line DSP noise eliminating module provides mono/stereo noise cancellation, and is suitable for use on all radios and receivers including SDR, especially those with stereo or two channel output options. It can be used with a mono speaker level input signal or a stereo line level input. There are three output sockets, a 7 Watt mono 3.5mm speaker output, 3.5mm stereo line level output and a 3.5mm stereo headphone socket. Note: The 7 Watt mono amplifier only powers up when a 3.5mm mono plug lead is actually connected to the "Audio Out" socket. If you connect a stereo plug into the "Audio Out" socket there will be no audio!
The bhi Dual In-Line module incorporates the latest bhi dual channel/stereo DSP noise cancelling technology, which has an improved noise cancelling algorithm that brings even better quality audio to the listener when operating in very noisy conditions. The processed speech is clearer and more intelligible as a result and makes your listening experience so much better.
The module caters for both high and medium level mono and stereo audio input signals, and has stereo line out, stereo headphone and mono speaker output sockets. You can listen with headphones and a mono speaker at the same time, and you can also connect a pair of stereo computer speakers to the line output socket allowing you to monitor two separate channels at the same time. This feature is ideal for DXing, club stations, training, special event stations and field day events.
- New improved dual channel DSP noise cancelling algorithm
- Improved audio quality - processed speech much clearer and intelligble
- Use with mono, stereo or two separate channels
- 8 noise filter levels - 8 to 40dB noise cancellation
- Great flexibilty - accepts speaker level and line level audio
- Separate 7 watt mono audio and stereo headphone amplifiers
- Easy to use controls for all functions
Operating voltage: 0 to 16v d.c. (800mA nom, 2.5A max)
Audio Input: Input – Stereo (Audio 1 – Plug Tip, Audio 2 – Plug Ring)
8 Ohms at 2Watts
10K Ohm at 600mV p-p
Audio Outputs: Headphones/small speakers – 0.5 + 0.5 Watts into 8 Ohms
Speaker – Greater than 6 Watts into 8 Ohms
Line - Stereo 600 Ohms at up to 0dBV
Connections: Audio Inputs - 3.5mm Stereo Jack Socket
Line and Headphone Outputs – 3.5mm Stereo Jack socket
Mono Speaker output – 3.5mm Mono Jack socket
Power 2.1mm Coaxial Power Jack centre Pin = +Ve
Controls: Audio Input Level
Combine/Separate signal switch
DSP Filter Levels 1 – 8 (8 to 40dB)
3 positions - Off/On/DSP Noise Cancelling On
Audio Out Level (Mono speaker and headphones - 3.5mm Mono connections only )
Line Out Level
Indicators: Power ON
Noise Cancellation ON
Channel 1 Overload
Channel 2 Overload
"Having to wear hearing aids I find the noise reduction excellent. I can now take away noise and read stations that without the Dual In-Line I would not be able to communicate with. Having used the NEIM1031 for many years the improvement is very good. The build is also improved. Very pleased with my Dual In-Line"
Don S M0FHM
"Reduced background noise. Super product, many thanks" Mr T Hayman
"Unbelievable! Noise gone! Other products don't compare. Your new Dual In-Line allows me to monitor 2 sep-arate frequencies with my reciver as it has 2 vfo's, comms from each speaker are c;ear, as if my volume is down. Perfection. Graham has gone out of his way to assist me, even sending replacement parts on older products, N/C! thank you, Ron" Ron Monfeli