NEDSP1061-KBD

Low level audio DSP noise cancelling module - Works across whole audio bandwidth! DISCONTINUED REPLACED BY NEDSP1901-KBD Now available click here
This DSP noise cancelling module works across the whole audio bandwidth and is able to separate the speech signals from the noise giving you excellent processed audio depending on which filter level you require.  It isn't a simple noise extraction system or bandpass filter system which can affect the processed audio quality.

Pre-wired audio DSP noise cancelling module Integrates directly into the low level audio path of your receiver, transceiver or audio system, giving you excellent DSP noise cancellation and greatly improve speech quality.  The module features DSP ON/OFF and up to 8 levels of DSP filtering via a small pushbutton interface keyboard. The module is supplied with general installation instructions plus specific fitting guides for the Yaesu FT-817, Kenwood TS-50 and Icom 706 MK II G. There are also 3rd party instructions available in the "Amateur Radio Installs" section for the Yaesu FT-847, FT-897, FRG100, Realistic DX-394, Alinco DX-77 and the Kenwood TS440.  Other radios can also benefit from this module.  contact us for more information.  The module can also be used to enable a quick evaluation of the noise cancelling properties for commercial applications when considering the basic NEDSP1061-PCB module.  This DSP noise cancelling module works across the whole audio bandwidth and is able to separate the speech signals from the noise giving you excellent processed audio depending on which filter level you require.  It isn't a simple noise extractor system which can affect the processed audio quality.

Installation information:
Just four wires are used to connect the module in circuit: Audio In, Audio out, 0V and Power. All that's left to do is drill holes to accommodate the switch assembly and label. Fitting kit supplied.

Controls:
Adjustable Level controls are provided for input level and audio output level. The module features an overload LED on the audio input to give visual indication of the correct signal level.The volume level of the beeper can be adjusted to suit.

Features

• Fully adaptive noise cancelling 9 to 35dB
• Minimum distortion to audio signal
• Up to 8 user selectable noise cancelling levels
• Single button operation with LED and audible indication
• Wide audio bandwidth for natural sound
• Input and output level adjustment
• Beep level adjustment
• Input overload indication LED
• Last used DSP level stored in memory (filter off)
• 5 - 15V DC operation

Installations of our NEDSP1061-KBD module can now be done in the USA by the Icom, Yaesu and Kenwood repair center company below.  Please contact Andrew if you would like him to install one of our NEDSP1061-KBD modules inside your radio:
Mid America Technology
Andrew Ruggiero WD8BWW
4129 NE Georgian Dr.
Lee’s Summit Mo 64064, USA
Tel: 816 223 3246  Email: 

Testimonial

"Excellent! I recently purchased the bhi DSPKR for my icom 706 radio and Wow!  It's like listening to FM on HF.  I also had the bhi "internal" filter installed by W4RT on my new Yaesu FT-897D & LOVE IT! (11-14-14). Looks great & looks like a factory upgrade! I love this DSP filter" Danny Garris